UNV IPC94144SR-X25-F40C 4MP+4MP LightHunter Dual-lens Network PTZ Camera
Part of the Uniview MultiView range, this dual-lens IP camera has a 4mm fixed lens for panoramic view AND a PTZ with auto-focusing 25x optical zoom. It has up to 100m IR range and a high-power speaker. It also features the LightHunter chipset, allowing for full colour at night with sufficient ambient lighting. Each camera requires a separate channel on the NVR.
– Play pre-recorded messages
– Resolution 4MP (2688 x 1520), POE
– PTZ – Motorised 4.8-120mm Lens, Angles 55.46° ~ 3.09° (H) | Panoramic – Fixed 4mm Lens, Angle 91.3° (H)
– PTZ – 25x Optical Zoom
– PTZ – Smart IR, Up To 100m IR Range | Panoramic – Smart IR, Up To 30m IR Range
– Day/Night, IR Cut Filter, 2D/3D DNR
– WDR, OSD, Triple Streams
– Privacy Mask, Motion Mask, ROI
– Supports H.264, H.265 or Ultra 265
– MicroSD Card Slot (see Special Features)
– VCA – Line Crossing, Intrusion Detection (see Special Features)
– ONVIF Compliance (Profile G, S, T)
– Temperature Range -40°C to 65°C
– Wide voltage range of ±25%
– Metal Housing, IP66 Rated
– 6kV surge protection
This camera has the following special features:
ANR (Automatic Network Replenishment)
ANR is a feature which allows a camera to record to an onboard MicroSD card, if it loses connection with the NVR. Once the connection has been re-established, the footage is transferred to the NVR. This feature requires ANR support from the camera and NVR.
LightHunter
LightHunter is the technology which allows for an outstanding image at super low illumination during the night for both static and moving scenes. This also means that the camera can display full colour at night. In technical terms, it enhances SN (signal-to-noise) by 17dB at 0.01 lux environment; this, in turn, increases both clarity and image colour at least 25% visually.
VCA (Video Content Analysis)
VCA is the ability to automatically analyse video to detect temporal and spatial events. This camera has the capability to do the following:
- Audio Detection – Detect a sudden increase or decrease in sound
- Auto Tracking – Tracking a specific target until it is out of range
- Enter Area – Entering into a pre-defined virtual region
- Face Capture – Detect and capture faces with attributes e.g. gender, glasses, face mask etc.
- Intrusion Detection – Entering and loitering in a pre-defined virtual region
- Leave Area – Leaving a pre-defined virtual region
- Line Crossing – Detect when a pre-defined virtual line has been crossed
- Linkage – If the panoramic camera is triggered, the PTZ will then auto-track the target
- Motion Detection – Movement within a pre-defined virtual region
- People Counting – People flow counting and crowd density monitoring
- Tamper Identification – Detect when the camera has been physically tampered with
Reviews
There are no reviews yet.